Gboard Arduino ATMega328P gsm SIM900

R$ 98,00

1 em estoque

Calcular valor do frete:


Gboard Arduino ATMega328P gsm SIM900

  • Arduino ATMega328P com Modulo SIM900 XBee nRF24L01
  • Interface de sensor brick 3 pinos
  • Soquete Micro SD.

Gboard Arduino ATMega328P gsm SIM900, Gboard is a unique Arduino board which features a SIM900 GSM GPRS module, an XBee socket, nRF24L01+ module interface and an ATMega328P controller. This board will add wireless XBee  nRF24L01+ control as well as GSM GPRS connectivity to your projects. It’s great for anything from home automation to robot control.

The possibilities are endless. Gboard can be used as a GSM GPRS data transfer or wireless communication project development platform. Gboard support wide range power supply and Micro SD for mass storage. There are some 3pin electronic brick sensor brick interface breakout on board, it offer an easy way for a quick prototyping. The board requires FTDI basic board to upload sketch, you can use our Foca board to do it.

Gboard Arduino ATMega328P gsm SIM900 can be powered by a mini USB, power Jack. he SIM900 module and XBee module communicate to ATMega328 through UART. They cannot be used with the same port at the same time, so there are two UART setting jumpers to configure the UART communication.

The figure of UART setting jumpers is as below. D0 and D1 are hardware UART ports of Arduino. D2 and D3 are digital GPIO of Arduino. There are two configurations to set the UART communication.

DescriptionUART Setting Jumpers Connection
Hardware UART to SIM900, Software UAR to SpecificST D0(Hardware Rx of Arduino), SR D1(Hardware Tx of Arduino),XT D2 (Software Rx/Tx of Arduino), XR D3 (Software Rx/Tx of Arduino)
Software UART to SIM900, Hardware UART to SpecificXT D0 (Hardware Rx of Arduino),XR D1(Hardware Tx of Arduino), ST D2 (Software Rx/Tx of Arduino), SR D3 (Software Rx/Tx of Arduino)

Informação adicional

Peso0,3 kg
Dimensões24 × 16 × 8 cm